Stock Suspension Upgrade
$29.95
Guarantee Safe Checkout
Description
Description
Stock Suspension Upgrade
1. Cut off carriages in front of bearing shaft holes.
2. Assemble as usual, Y- axles must point to the rear include carriage springs.
3. Place small washer behind the front Y-axles as shown.
4. Drill a .110 hole on both sides, through washer, for location
5. Attach shaft with supplied screws.
6. Drill a .125 hole on the rear Y- axle as shown. Center on panel, 1/4 from the bottom.
7. Insert The supplied socked head screw from the top of the Y-axle.
Completed assembly, engage carriage springs to y-axle.
Additional information
Additional information
| Weight | .2 oz |
|---|
Reviews
There are no reviews yet.